CardSim is a Card simulator software designed for card reader testing at protocol level, according to the ISO7816-3, EMVCo or GSM-1111 specifications. CardSim is based on the Micropross hardware StarX150 and offers all facilities to qualify smart card readers or to verify reader’s behavior at pre-certification step.

CardSim works with the MP300-TCx hardware series from the Micropross company.

Product Sheet

Open solution

• CardSim users can modify their script sets. Users can also build their own script sets, taking in account their custom needs
• Script creation and modification
• Two description modes for the test session : APDU and low level modes.
• Supports various "loopback".

Efficient solution

• Reader Configuration concept in connection with documents such as " Implementation Conformance Statement "
• Graphical area with a logical analysis at 50 ns precision - zoom and cursor management
• Automatic timing measurement
• Automatic error detection (protocol, timing)
• PDF reporting
• Single script mode for qualification
• Multiple script mode for validation.
• Functional tests available :
  • ATR timings and error management
  • Opposite and Start to Start delay management
  • PPS management ( all ISO-7816-3 defined values for TA1 are supported )
  • T=0 et T=1 protocol errors management
  • Etu management

Script sets available

• EMV2000 Level One test suites with GSM 11-11 et ISO 7816-3 extensions
  • ATR tests
  • T=0 protocol tests
  • T=1 protocol tests

Hardware configuration

• PC under Windows® 2K/XP
• Card simulator Micropross Star1150/Star3150
• Ethernet link (TCP-IP).

TermSim is a Reader simulator software designed for card testing at protocol and/or electrical level, according to the ISO7816-3, EMVCO or GSM-1111 specifications. TermSim is based on the Micropross hardware MP300-TCX and offers all facilities to qualify smart cards or to verify card’s behavior at pre-certification step.

TermSim works with the MP300-TCx hardware series from the Micropross company.

Product Sheet

Open solution

• TermSim users can modify their script sets. Users can also build their own script sets, taking in account their custom needs
• Various mode for the test session : APDU, GSM, low level, command file.
• Functional and Electrical testing.
• Script creation and modification

Efficient solution

• Card Configuration concept in connection with documents such as " Implementation Conformance Statement "
• Graphical area with a logical analysis at 20 ns precision - zoom and cursor management
• Automatic timing measurement
• Automatic error detection (protocol, timing)
• PDF reporting
• Single script mode for qualification
• Multiple script mode for validation.
• Functional tests available :
  • ATR timings and error management
  • Opposite and Start to Start delay management
  • Clock management - frequency switching and clock stop/run
  • PPS management ( all ISO-7816-3 defined values for TA1 are supported )
  • T=0 et T=1 protocol errors management
  • Byte format - bit per bit setting
• Electrical tests available :
  • Vcc and output voltage management ( I/O, Reset and Clock )
  • Rise and fall time measurement and management
  • Schmoo-plot
  • Voltage and current measurement
  • I/O perturbation

Script sets available

• EMV2000 Level One test suite with GSM 11-11 et ISO 7816-3 extensions
  • ATR tests
  • T=0 protocol tests
  • T=1 protocol tests

Hardware configuration

• PC under Windows® 2K/XP
• Reader simulator Micropross MP300-TC1/2
• Ethernet link (TCP-IP).